34 | Elite 23 Installation Guide, Rev. A |
N drives
Setting the SCSI ID jumpers
Use the J4A connector to set the SCSI ID (see Figure 7) on model ST423451N. To change the SCSI ID, install jumpers on the appropriate pins as shown in the illustration.
J4A
Pin 1
J01
J4B
Pin 1
J4A
Pin 1
SCSI ID = 0 (default)
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
