Your 44/62 Ultra Plus must be setup at the place where it will be used. The stand must be placed on a flat level surface.
12.Cut the
13.Inspect the machine for any physical damage.
14.Plug the power cable into the grounded outlet with appropriate service.
The machine must be installed next to an outlet! Do not use extension cords. The plug and the outlet must be easily accessible. Please ensure that you plug your laminator into a grounded,
The laminator should only be connected to a power supply outlet of the voltage and amperage marked on the rear panel. The laminator has a grounded plug (three prongs). To reduce the risk of electrical shock, this plug is intended to fit only a grounded outlet of the proper amperage, and in only one way.
3.5.1 Adjustable feet
To secure the stand on the floor, turn the adjustable foot down by hand, until it’s pressed against the floor. Manually lock the adjustable foot with the nut (figure 6).
English
Nut
Feet
Figure 6
Unpacking and Installation | 11 |
