6.11Encapsulating with a ProSEAL® Flexible Pouch using a ProSEAL® Carrier Board

1.Refer to the instruction sheet packed with each box of ProSEAL Flexible Pouches for specific instructions on encapsulating.

2.Also, refer to the instruction sheet for information on Compatible Media, Process Conditions and Technical Information.

3.The ProSEAL Flexible Pouch consists of two pieces of film that are hinged at one end, along a short side. Separate the two pieces starting at the end opposite the hinge. Take care not to break the hinged seal.

4.Insert the article to be laminated in the pouch so there is at least a 1/8" (3.5mm) border around each of the sides. This ensures that moisture never reaches the image.

5.Place the pouch with the image on the carrier board included with the Flexible Pouches or ProSEAL Sled carrier. (The ProSEAL Sled is a carrier board to assist in the handling of large Flexible Pouches. It is made of materials that will not damage or cause excessive wear to the ProSEAL Laminators.) Smooth out any wrinkles with the side of the hand or a soft flexible squeegee.

6.Tape the leading edge of the pouch to the sled using masking tape.

7.Adjust the Control Knob to the 3/16" (5mm) setting for the ProSEAL Sled. Be sure that the heat is on. (max. temperature)

8.Insert the carrier board with the Flexible Pouch on top into the inlet opening. Ensure that the carrier board is centered and straight. A gentle push may be required to start the carrier board into the machine. Hold the edge of the carrier board until it is engaged and the Laminator begins pulling it on its own.

9.The carrier board will feed through the Laminator and automatically exit at the rear of the machine.

10.CAUTION! The carrier board will be hot!

Allow it to lie flat and cool before removing the tape.

Note:

If there is any dirt or adhesive on the surface of the board, it can be removed by dampening a lint free cloth with ISO Propyl Alcohol (IPA) and wiping the surface.

WARNING:

ALWAYS USE CARE WHEN USING IPA! IPA IS VERY FLAMMABLE! THE FLASH POINT OF IPA IS 11°C (51.8°F). THE SELF-IGNITION TEMPERATURE IS 400°C (752°F).

28

Application Processes

Page 30
Image 30
SEAL 44/62 user manual Application Processes

44/62 specifications

SEAL 44/62 is a notable vessel in the realm of modern naval architecture, epitomizing cutting-edge technology and design for maritime operations. Classed as a versatile multi-role vessel, the SEAL 44/62 stands out for its ability to perform a wide array of missions, including surveillance, reconnaissance, and special operations.

One of the main features of the SEAL 44/62 is its advanced hull design, which incorporates a lightweight composite material that enhances speed and maneuverability. The vessel employs a streamlined form that is optimized for hydrodynamic efficiency, allowing it to travel at high speeds while minimizing wake and radar signature. This is crucial for stealth missions where the element of surprise is paramount.

Propulsion is another key characteristic of the SEAL 44/62. Equipped with hybrid propulsion systems, it combines traditional diesel engines with electric motors. This dual capability not only provides efficient fuel consumption during extended operations but also allows for silent running, making it harder to detect by enemy forces or anti-submarine warfare technologies.

The vessel’s onboard technology features a state-of-the-art command and control system that integrates artificial intelligence to enhance situational awareness. This system allows operators to assess threats in real time and coordinate responses seamlessly. Additionally, advanced radar and communication systems ensure that the SEAL 44/62 can maintain secure and reliable contact with command centers and allied units.

In terms of versatility, the SEAL 44/62 is designed with modular capabilities that can be customized based on mission requirements. It can be outfitted with various mission payloads, including unmanned aerial vehicles (UAVs), remotely operated underwater vehicles (ROVs), and different sensor packages, facilitating missions ranging from intelligence gathering to combat support.

Furthermore, the SEAL 44/62's interior is designed for operability and comfort. The vessel accommodates a crew of skilled operators while ensuring they have access to all necessary facilities for extended deployments. The ergonomic workspace is equipped with modern technology that enhances efficiency and effectiveness.

Overall, the SEAL 44/62 represents a significant advancement in naval vessel design, showcasing a blend of speed, stealth, and versatility. Its advanced technologies and adaptable features make it a formidable asset in modern maritime operations, reflecting the evolving needs of naval warfare.