6.5 Decaling without liner
Preparation:
Select the films that you will use on the top and bottom of the images, it is advisable to use slightly wider width films compared to the print width. This way the print can be trimmed with a border, so as to reduce waste, but be enough to leave a border. Place the material rolls into the machine with the adhesive facing you. Web as follows:
English
Figure 24 | Figure 25 |
Linerless films:
1.Pull the film down from the upper unwind position and place the film evenly over the top roller.
2.Pull the film from the lower unwind position and stick them together on the top roller.
3.Press the laminates into the nip using the provided leader board.
4.Replace the infeed table.
5.ALWAYS INSTALL THE IMAGE GUIDE.
YOU ARE NOW READY TO FEED IMAGES.
Application Processes | 23 |
