Sealife DC500 manual Service@sealife-cameras.com

3)Format the camera’s internal memory and SD memory card. The Format function is located in Set-Up mode menu.

4)Report the camera lock-up issue to the SeaLife Service center. Email: service@sealife-cameras.com.

Q – The black rubber tube ring (flashguard) in the lens port area comes out. Is this normal?

A – Yes, this part is designed to be removed for easy cleaning of the housing lens. This is the flashguard that prevents the inner camera’s flash from reaching the lens and causing glare. This should be placed back into the lens port area so it’s completely seated. If this part falls out frequently, SeaLife can ship out a newer flashguard that the consumer can replace himself or herself. Ship at n/c Item# SL15014

Flashguard out of position Flashguard completely seated

Q – Is it recommended to use the SeaLife 3X, 8X or 16X lens with the DC500 camera?

A – No. The SeaLife close-up lenses may fit the DC500, but does not offer any real benefit. The close-up lenses are design for our fixed focus film and digital cameras. The DC500 uses and auto focus system to focus from 2.5” to infinity, so the lenses are not required to get the picture in focus. Some DC500 customers that use the close-up lens say it helps the camera to focus quicker. On the downside, we have seen the lens cause a glare “ring” that shows up in the picture. SeaLife does not recommend using any of the close-up lenses with the DC500.

SeaLife Cameras (Division of Pioneer Research), 97 Foster Road, Moorestown, NJ 08057

(856) 866-9191 service@sealife-cameras.com www.sealife-cameras.com