RBlades, 0ffii | Sears 113.23615 guide

113.236150

your owner's manual for future reference

packed with your scroll saw. The instructions and illustrations shown on blades.

scroll saw owner'smanual for safety instructions and proper use of the scroll saw.

rBlades

IWARNING :_To avoid i_iju_:from		accidental	starting,	i
lahNays 1urn	switch _:,!OFF and	:unplug power cord		I
Ifrom_:outletbefore removing or replacing the blade, I
NOTE: Saw comes Set :uplfor pin end blades, tf you are
going:to use	plain end blades, refer to the		instructions		Knob
under:_'installingPlain End Blades".
Removing	Pin End Blades
:1;,Unplug power cord from outlet and check that switch is
0ffii_....

2_Loosen tension on blade by turning tension knob coun-

temlockwise _ about three full turns.

3, Remove-blade ftorn :the iiower Blade holder by pushing down on the upper arm, releasing the blade!pin from the lower blade holder_: Remove blade from the upper

btade holdei_by slightly;lifting, up on tt_e blade and pull-

ing forward,

Image 24

Sears 113.23615 manual RBlades, 0ffii, Unplug power cord from outlet and check that switch is

Contents

Airs Number When Installing or Moving The Saw Safety Signal Words Before Using The SawSafer Before Each Use Tan Ahead to Protect Your Eyes, Hands Face and EarsRemove all traces of wood dust from on Whenever Saw Is Running YU Wilti HolldBefore Leaving the Saw Inih Motors, Specifications and Electricat Requirements Connecting To Power Supply OutletHazard and may also create a shock hazard Prong Plug ProperlyU Grounded Contents Assembly and alignment Do not lift saw by this arm Lift ToAlign the Bevel indiCator Bevel Pointer UnP!ug=powercord from outlet and Checkthat switch is ofL Removing Pin End BladesKnob Installing Plain End Blades Unplug power cord from outlet and check that switch is offRemoving Plain End Blades Ion Knob Height AdjustmentKnob Hold-Down Dust BlowerBlade Hold-Down Foot Mounting the Scroll Saw to a Bench Upper Blade Holder Work Hogd-Down Blade Support Children And Others Speed Control/On-Off Knob Push Rotate Pin and Plain end Biades 012 Basic Saw Operations Maintain Tools With Care Ha a Removeall traces of wood dust from insideInspect your workpiece Keep your face and body to one side of blade, out of line Power source outlet before removing or replacing the blade Whenever Saw Is RunningBefore Leaving The Saw Before freeing any jammed material Pastewax onthe woktabte will Sears recommends the following accessories Wrong tension 1312 Always Order By Part Number-Not By Key Number Plate Clip Unplug power cord from outlet and check that switch is RBlades0ffii Installing Pin End Blades Blade Holder BossThin ClampBlade Clamp Thick Holder Upper Blade Holder Lower Blade Holder TWrencl Rod Lower Blade HolderWrench Upper Blade Holder PointingBlade Hex Socket Screw Installing Plain End Bades Beveled Edge Circular ImiDression Blade Clam IBld rBlade Clamp Circular Btade Beveled Holder Edge Impression INCH Variable Speed Scroll SAW Sold by SEARS, Roebuck and CO., Chicago, II U.S.A