8. CUTTING TOOL
I
7. CRADLE
5. CONTROL
6. TOOL POST /
KNOBS
4.TO(
BASE
3.BRACKETS
\
\
9. FOLLOWER PINS
2. VERTICAL CHANNELS
t
1. FRONT CHANNEL
_12_
i
13.CENTER SCREW
1. FRONT CHANNEL...comfortably supports your hands while maneuvering the Cutting Tool.
2.VERTICAL CHANNELS...support the Tool Post Base and the Brackets.
3.BRACKETS...hold the template or an existing turning.
4.TOOL POST BASE...supports the Tool Post and contains the control Knobs and the Follower Pins_
10. BED PLATE
There are two strips of very slippery plastic tape glued to
the underside so that it moves easily during operation. Be careful not to tear these tapes by bumping the base against a sharp object.
Should the tapes become damaged or worn, replace them. (See replacement parts list in the back of this manual).
_ 10
