Sears 113.24907 specification

operation

turn the Tailstock to the right-hand side of the Lathe bed and replace the: left T_e Rod. Attach a Spindle

Bracket to tbe right-hand BraCket: With the C_amp P ate

align the	_'ight-bend cone-Point	Set Screw	with the	,	,,
or a piece	of plyWood across	the Vertical	Channels,	,	,,
point in the Cup center asshown.

POINT OF CUP CENTER

\

\

CLAMP PLATE /"

J

./

EXISTING SPINDLE

7, If the existing spindle is 2-1/2inches in diameter or less, it can be used in place of a template.

8.tf the existing spindle is larger than 2-1/2 inches in diameter, it witl be necessary to make a template.

22

Image 22

Sears 113.24907 manual Bracket to tbe right-hand BraCket With the Camp P ate Align

Contents

ISears Prinedi US Remove Adjusting Keys and Wrenches Full ONE Year Warranty on Craftsman COPY-CRAFTERKnow Your Power Tool Keep Work Area Clean Never Leave Tool Running UN Attended Never Stand on ToolCheck Damaged Parts IIP Contents Toolsneeded Assembly BED Assembly Appr0ximateiy Inches from Mounting COPY-CRAFTER BED to Lathe BenchBe sure to unscrew the Threaded Slide and remove it Assembly Into Nut t0 the p0irit of the spur Center as shown Cutting Tliel €nteriine Latle see Assembgy BED Plate Center ScrewFront Channel Cutting ControlComfortable BED PLATE...supports the tool holder or the Lathe Underneath Both Channels Sharpening Making Practice Cuts Handle Sound BlockGavel Head Page Inches ThisFoot CUts t6 HandsOhtii YOU get the feel Cutt ng Operation Making the Sound Block OperaUon Operation Duplicating a Spindle from AN Existing ONE Bracket to tbe right-hand BraCket With the Camp P ate Align Operation Repair parts Repair parts List of Parts in Loose Parts Bags QTYPage EL O