Sears 385.11608, 385.12814 owner manual ++i, Free-Arm Sewing

\

@

I++i

t

?iNeedle clam screw

FLat%+ side

away

item You

- Accessory Storage Box

The lid ot the accessory storagebox lifts

open toward you.

Sewing accessories are conveniently located in the box.

• Free-Arm Sewing: the

Removable Extension Table

To Remove the Extension Tabie (for tree-arm sewing)

1.Grip the table with your index finger and thumb, as shown.

2.Pull gentiy to the left. The extension table will snap out.

To Attach the Extension Table

{for flat=bed sewing)

1.insert the tab and the pin into their catches.

2+ With your thumb and index finger, gently snap in.

•Change the Presser Foot Use the correct presser foot for the stitch you w_sh to sew.

To change presser leet, raise

the presser bar to its highest position by lifting the presser toot lever.

Loosen the presser toot thumb screw, choose the proper foot, insert from the bottom.

Tighten the screw using the large screw driver to make certain the foot is secure.

Choose the Needle and Thread

•To Change the Needle

NOTE: Raise the needle bar to its highest position by turning the hand wheel toward you.

1+ Loosen the needle clamp screw by turning it toward you.

2.Remove the needle by pulling it downward.

3.insert the new needle into the needle clamp with the flat side away from you.

4.Push the needle up as tar as it w}II go.

5.Tighten the needte clamp screw firmly with the large screwdriver from the accessory box.