Sears 385.17724 owner manual Check Your PresserFoot

Check Your PresserFoot

The Presser feet are an important feature of this machine, You need to know what each foot does in order to use them effectively.

Your presser foot is held in place by a Foot Holder. Each presser foot merely snaps on the foot holder, which is seldom removed.

If you need to remove or attach the foot holder, here is what you do:

To Remove: To Attach:

Presser bar --

Foot holder

SCreW

=Change the Presser Foot

Use the correct presser foot for the stitch you wish to sew, Consult the

Stitch Pattern Chart and the detailed directions for sewing with the various presser feet.

To Snap Off:

I

To Remove:

Turn the screw toward the back of

the machine. Use the large screw driver.

To Attach:

1. Match the hole in the foot holder with the threaded hole in the presser bar.

2_ Fit the foot holder screw into the hole,

3.Tighten the screw by turning it toward you.

To Snap Off the Presser Foot:

1.Raise the needle bar to its highest position by turning the hand wheel toward you,

2, Raise the presser foot.

3.Press the snap-on button on tile back of the foot holder. The presser foot will drop off.

10