Sears 385.17724 owner manual WLdth, =dth, No preer, Foot, Width as necessary to form each pattern

= Monogramming		Embroidery
Set the Machino		Set the Machine
Stitch	wLdth	Stitch	w=dth
control	5
		control	1 to 5
@
i 2	3 4	_ 2	3 4

Top thread tension

control 2 to G

Stitch length control 0.5 to ]

2

Stretch Stitch

F' Satin stitch foot

Top thread	tension	Stitch length	control
control 2 to	6	Any number	(not

necessary to adiust)

Here's How

1.Set the same as satin stitch.

2.Back the fabric with paper or interfacing.

							No pre_er
3.	Draw	the	letters	on	the	fabric	foot	Stretch Stitch
	with	tailor's	chalk.
4.	Satin	stitch,	adjusting		the	stitch	Darn	m9 plate

width as necessary to form each pattern,

5.If using paper, carefully remove it when you have finished sewing.

Here's How

1.Put the darning plate on the needle plate (see page 29),

2,	Remove	foot	holder	(see page		10),
3.	Adiust	the	stitch	width	as	desired
	(see page 21		),

4.Draw the design on to the fabric with tailor's chalk.

5.Stretch the. fabric between embrol-

dery hoops and place under the needle.

6, Lower the presser foot lever to engage the top thread tension.

7, Holding the top thread in your left hand, rotate the hand wheel toward you one complete turn.

Pull the top thread to draw the bobbin thread through to the surface of the fabric.

8.Using a medium speed, stitch along

the marked outline, guiding the fabric carefully by hand.

34