1.Unplug the machine and remove the presser foot and needle.
2.Remove the bobbin cover plate.
3_ Remove the screw on the left side of the needle with the large screw driver.
4.Remove the needle plate.
J
6.Use the lint brush to clean the
feed dogs, hook race and bobbm
holder. Also use a soft, dry cloth,
Open face cover plate and oil points as shown below at least once a year. Oneor two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics.
¢
5.Take out the bobbin. Lift up the bobbin holder and remove _t.
In case machine is not used for an
extended time, oil it before sewing. Use good quality sewing machine oil.
No other oiling is required
Above points are only area which require oiling on this machine.
Red marks
J
7.Line up the red marks and place the bobbin holder so the knob fits next to the stopper m the hook race, as shown above.
59
