e PresserFoot Types
Zigzag Foot
f
Straight Foot
f
To Snap On
f
Gr°°ve _ P_
To Snap Onthe PresserFoot:
1. Place the presser foot so the hori-
zontal pin on the foot lies just
under the groove of the foot
holder.
2. Lower the presser foot holder to
lock the presser foot in place.
NOTE: If you do not hear the
presser foot snap in place,
press down on the presser
foot holder firmly until you
hear the snap.
A: Zigzag foot
Use this foot .for both straight and zigzag
stitching.
Uses: Zigzag stitching (seepage 31),
Bar tacking (seepage 33),
Button sewing (seepage 35),
Rick-rack stretch (seepage 3_6),
Three-step zigzag (see page 37),
Overcast stretch (seepage 38),
Lace work !see page 40),
Two-point shell stitching
(seepage 5__00},
Smocking (see page 51),
Stretch patching (seepage 51),
Fagoting (seepage 52),
Herring bone stretch (see page 52),
Elastic stretch (see page 533),
Box stitching (seepage 5__3),
Two-point box stitch (see page 54),
Overedging stitch (seepage 5_44).
H: Straight foot
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 2__8),
Topstitching (seepage 2__99),
Straight stretch (seepage 30).
11