![](/images/new-backgrounds/1013753/13753101x1.webp)
Fabric Preparation:
Put the top sides of the fabric together and sew to the end of the zipper
opening. Use the reverse to lock the stitches.
Sew the zipper opening with stitch length at "4" and top thread tension at "3"-
o_ opening
Top s_de ot tabrlc
Set the Machine
Stitch width
control 0
Top thread tension control 2 to 6
Stitch length
contrOt 2
Stretch Stitch
Itt8")
/Zipper leech
Zipper tape
To Sew:
1, Reset stitch length at 2 and top thread tension at 2 to 6.
Fold back the left seam atiowance as shown.
2_ Turn under the right seam allow- ance to form a 1/8" fold.
4, Attach the presser bar to the right pins on the zipper foot.
5. | Lower | the zipper | foot | on | the | top | ||
| side | at | the | bottom | of | the | zipper | |
| so that | the | needle | pierces | the | fold | ||
| and | the | zipper tape. |
|
|
| ||
6. | Sew | through | the | fold | and | the |
Top edge ot tabr_c | E: Zipper | |
foot | ||
|
To attach the zipper foot:
oTo sew on the left side of the zipper, attach the presser bar to the right pros on the zipper foot,
e pin on the_ ricjht hand snde
oTo sew on the right stde of the zipper, attach the presser bar to the left pins on the zipper foot.
3.Place the zipper teeth next to the 1/8" fold and pin in piece,
| zipper tape to the point where the | |||
| slider | begins, |
|
|
7. | Lower | the needle | to hold | the |
| fabric and raise the presser foot, |
|
48