i, illlJllJll,i iIll i, ill iiJlllllj .l= Iill,,ll IJl J;
OPERATIONKNOW YOUR SNOW THROWER ......................................
READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR SNOW
TH ROWER, Compare the illustrations with your snow thrower to familiarize yourself with the location of various
controls and adjustments. Save this manual forfuture reference_
AUGER DRIVE
LEVER
TRAC'fION DRIVE
LEVER
CHUTE DEFLECTOR
SPEEDSHIFTER
LEVER
CRANK
ASSEMBLY
DISCHARGE
CHUTE
WEIGHT
TRANSFER
IGNITION
KEY
BUTTON
CHOKE CONTROL
THROTTLE CONTROL
RECOIL
STARTER
HANDLE
FIG. 7
LI wmuw±
SEARS TRAC-PLUS SNOW THROWERS conform to the safety standards of the American National Standards
Institute.
AUGER DRIVE LEVER: Starts and stops the auge'r"and"
impeller (snow gathering and throwing)=
TRACTION DRIVE LEVER - Propels the snow thrower'
forward and in reverse.
SPEED SHIFTER LEVER - Selects the speed of the
snow thrower (6speeds forward and 2 speeds reverse).
CRANK ASSEMBLY *Changes the direction of snow
throwing through the discharge chute.
CHUTE DEFLECTOR -Changes the distance the snow
is thrown°
DISCHARGE CHUTE -Changes the direction thesnow
is thrown.
WEIGHT TRANSFER PEDAL - Engage for heavy snow
conditions, to keep thesnow thrower from climbing drifts
and hard-packed snow.. When released, it eases trans-
port of the snow thrower°
HEIGHT ADJUST SKIDS - Adjusts the ground clear-
ance of the auger housing.
IGNITION KEY - Must be inserted to start the engine.
RECOIL STARTER HANDLE - Starts the engine manu-
allyo
CHOKE CONTROL - Used to start acold engine.
PRIMER BUTTON - Injects fuel directly into the carbu-
retor manifold for fast starts in cold weather_.
THROTTLE CONTROL - Controls the engine speed..
10