Sears 831.29506

Assembly requires two persons. Set the treadmHUin a cUeared area and remove aUUpacking materiaUs, Do not

dispose of the packing materiaUsuntil assembUy is compUeted, Note: The underside of the treadmiUUwaUking beUtis

coated with high-pedormance Uubricant,During shipping, a smaUUamount of Uubricant may be transferred to the

top of the waUking beUtor the shipping carton, This is a normaUcondition and does not affect treadmiUUpedor-

mance, Ufthere is Uubricant on top of the waUking beUt,simpUywipe off the lubricant with a soft cloth and a mild,

non-abrasive cleaner,

AssembJy requires the included allen wrenches _ and your own philtips screwdriver

and wire cutters __ ._.

Use the drawings below to identify the assembly hardware, The number in parentheses below each drawing is

the key number of the part, from the PART LIST on pages 26 and 27, The number after the parentheses shows

the quantity needed for assembly, Note: If a part is not in the parts bag, check to see if it is preattached to one of

the parts to be assembled, If a part is missing, cult toil-free 1-888-533-1333.

Extension Leg Bolt (96)-4

1/4" Washer

(39)-4

Internal Star

Washer (77)-4

1" Tek Screw (80)-2

Upright Bolt (78)-4

Latch Screw (79)-2

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully raise the

Uprights (97) to the position shown, Insert one of the

Extension Legs (92) into the right Upright, (Note: It may

be helpful to tip the Uprights forward as you insert the

Extension Leg.) Make sure that the Warning Decal (91)

is in the indicated location,

Insert the other Extension Leg (not shown) in the same

way.