Your control will allow you to lock down the touch pads so they cannot be activated when

pressed, if you°re worried about leaving the oven unsupervised, activate this feature:

1.Press and hold, at the same time, the BAKE and BE_OEL pads for 3 seconds, until the display shows SF.

2, _a} Press the CLEAN pad. The display shows LOC OFF (lockout off).

_b) Press the @LEAN pad aga6n. The display will show LOC ON (lockout on).

3, Press the START pad.

This feature can onNy be set when t_e oven Es not in use.

When this feature is on, the display will show fLO@9 ff a touch pad is pressed. (This feature will not affect the Clock, Timer or Oven light pads.)

Your new control has a cook and hold feature for timed cooking only that will keep hot cooked foods warm up to 3 hours after the timed cooking is finished. To activate this feature.

7]. Press and hold, at f_he same t_me, the BAKE and BROIIL pads for 3 seconds, until the display shows SF,

2, _aJ Press the OVEE_ COOKB_G THME pad. The display will show HtLd OFF.

t[bJ Press the OVE_ COOKHNG TnME

pad a.Oa_n to activate the feature. The display will show HtLd 0_.

3, Press the START pad.

This special feature will allow you to change the speed; # 1 means speed of change is slow up to #5 which means speed of change is fasL To set the speed you prefer, follow these steps:

1.Press and hold, at the .same tHrne, the BAKE and BRORfL pads for 3 seconds, until the display shows SF.

2, Press the UP arrow pad. The display will show the current set speed.

3= Press the UP arrow to increase the speed up to the number 5.

or

Press the DO_qfE_ arrow pad to decrease the speed down to the number 1.

4. Press the START pad.

_8

Page 18
Image 18
Sears 911.41369 manual TbJ Press the OVE Cookhng TnME