Your new control has a series of tones that will sound at different times. These tones may sound while you set the control for an oven function, or at the end of the oven function. It will also alert you there maybe a problem with
the functions. Below are the types of tones and a brief description of each.
TO_ES WH#LE SETT#_G THE
CO_TROL
When you press a touch pad you will hear a beep. This beep will let you know you have placed enough pressure on the pad to activate it. (The arrow pads do not beep.)
E_3D OF T#MED CVCLE TGE#E
At the end of a timed cooking function, you will hear 3 short beeps followed by I beep every 6 seconds. This 6 second beep will continue
to sound until the C_.EA_OFF pad is pressed or you may select the special feature to cancel this 6 second beep from sounding at the end of future cycles.
TO CA_3CEL THE 6 SECO_D BEEP
t, Press and hold the BA#_[E and B_OHL pads, a* _the same ftHme for 3 seconds, until the display shows "SF".
2.Press the _HTCHE_ TIIMER Oh#/OFF pad. The display will show "COb,_ BEEP" (continous beep).
Press the KBTCHE_ TIIMER O_/OFF pad again. The display will show _'BEEP" (beep canceled).
4.Press the START pad.
if you would like to retum the 6 second beep repeat steps above until the display shows your choice and press start.
continued
A TTE_T#O_ T@_E
This tone will sound if you make an error or an
oversight is made while ,setting an oven function.
Examples would be:
ao Setting a clean cycle and the oven door is not properly closed.
bn Setting a function and not pressing the START pad.
Cu Pressing an additional function pad witf_out first setting a temperature or time.
Any of these can be quickly identified by watching the display.
PECEHEA T TOPEE
When you set an oven temperature, the oven
automatically starts to heat. When the
temperature inside the oven reaches the temperature you have set, a tone will sound to let you know the oven is ready for baking.
If you set an oven function and the control beeps while the display is flashing _'F"and a number _F.4" or letter _F_" there may be a
problem with the control or oven. Simply
press the CLEA_JOFF pad and wait about an hour. Try setting the function again. If tl_e
code repeats, write down the flashing code
and call for service. Tell the technician
what the code was flashing.
9
