Sears 911.47465 Removableparts, To Remove The Cover, Replace The Light Bulb, To Replace Cover

REMOVABLEPARTS

BULB	LiVE	SOCKET
	COLLAR

OVER BAIL WiRE

TO REMOVE THE COVER:

1.Disconnect electrical power to the oven at the main circuit breaker or fuse box.

2.Hold .your hand under cover and firmly push back the bail wire, until it clears and releases the bulb cover..

REPLACE THE LIGHT BULB:

Unscrew the light bulb and replace it with a 40-watt home appliance bulb.

TO REPLACE COVER:

1, Place the bulb cover into the groove of the bulb socket.

2, Pull the bail wire forward until it snaps into the indentation on top of the bulb cover.

3, Reconnect the efectrical power to the oven

Do not touch a hot oven light bulb. Do not touch a bulb with

wet hands or wet cloth.

Never touch the electrically five collar on the bulb when

removing or replacing the

bulb. Do not remove any screws.

TO REMOVE:

Open the door to the broil stop position.

Grasp the door on each side and lift uP and off the hinges. DO NOT

LIFT THE DOOR BY

THE HANDLE.

i,ii iiill i ii iiiiiiiiii i iii i iiii ii

When the door is removed and the hinge arms are in the broil stop position, do not bump into the hinge arms.

They could snap back

and cause injury to hands and damage the porcelain finish of the front frame. Cover the hinge arms with empty paper towel rolls or towels while working in the oven area.

iii i ,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,

TO REPLACE:

Remove the paper towel rolls or towels. Make sure the hinges are still in the broil stop position. Grasp the door on each side. Lift

the door over each hinge. Line the slots at the

bottom of the door with the

hinges. Slide the door down over the hinges as far as it will go

20