Putting the receiver into operation
Putting the receiver into operation
Preparing the receiver for use
Recommendations for optimum reception
To ensure optimum reception even under difficult conditions, we recommend connecting remote antennas and, if necessary, using antenna splitters (see “Accessories and spare parts” on page 52).
When
| If you want to mount the receiver into a 19” rack: |
| Read the corresponding chapter on page 14. |
| If you want to set up the receiver on a flat surface: |
| Read the next chapter. |
| Setting up the receiver on a flat surface |
|
|
CAUTION! | Risk of staining of furniture surfaces! |
| Some furniture surfaces have been treated with varnish, polish or |
| synthetics which might cause stains when they come into contact with |
| other synthetics. Despite a thorough testing of the synthetics used by us, |
| we cannot rule out the possibility of staining. |
| Do not place the receiver on delicate surfaces. |
|
|
Mounting the rack mount “ears”
The rack mount “ears” are designed to help protect the operating elements from damage or deformation, e.g. if the receiver is dropped. Therefore, fasten the rack mount “ears”, even if you do not want to rack mount your receiver.
To fasten the rack mount “ears” :
Unscrew and remove the two recessed head screws (M4x8) on each side of the receiver (see
12