Putting the receiver into operation

Connecting receivers in a network

You can connect several receivers in a network. The receivers are remote controlled via a PC running the “Wireless Systems Manager” (WSM) soft- ware. This software will assist in the quick and safe configuration of multi- channel systems.

For further information on downloading the software, visit the ew G3 product page on our website at www.sennheiser.com.

TRUE DIVERSITY RECEIVER EM 300

FREQ. RANGE-X: XXX - XXX MHz

IDENT. NO.: XXXXXX

SER. NO.: XXXXXXXXXX

IC: 2099A-XXXXXXX

0682

DESIGNED IN GERMANY, ASSEMBLED IN USA

 

￿Connect a standard network cable (at least Cat 5) to the LAN socket  of the receiver.

￿Connect your receivers to an Ethernet switch.

￿Additionally, connect a PC to the Ethernet switch as shown.

￿Set up your multi-channel system as described on page 45.

The yellow LED  at the rear of the receiver indicates the network activity:

 

Yellow LED ...

Connection status

 

 

... lit

Network cable connected to the Ethernet

 

 

 

switch or PC

 

 

 

 

 

 

... off

No connection

 

 

 

 

 

 

 

 

 

18