Putting the receiver into operation

To mount the antennas:

￿Use remote antennas, if necessary in conjunction with the ASA 1 antenna splitter (see “Accessories and spare parts” on page 52).

To mount the receivers into the rack:

￿Slide the receivers into the 19” rack.

￿Secure the rack mount “ears” to the 19” rack.

Connecting an amplifier/mixing console

TRUE DIVERSITY RECEIVER EM 300

FREQ. RANGE-X: XXX - XXX MHz

IDENT. NO.: XXXXXX

SER. NO.: XXXXXXXXXX

IC: 2099A-XXXXXXX

0682

DESIGNED IN GERMANY, ASSEMBLED IN USA

The receiver’s ¼” (6.3 mm) jack socket and XLR-3M socket are connected in parallel, allowing you to simultaneously connect two devices (e.g. amplifier, mixing console) to the receiver.

￿Use a suitable cable to connect the amplifier/mixing console to the ¼” (6.3 mm) jack socket or the XLR-3M socket .

For detailed information on balanced and unbalanced connection, please refer to the chapter “Connector assignment” on page 56.

17