Using the receiver
To switch the receiver to standby mode:
Keep the STANDBY button pressed until “OFF” appears on the display panel.
The receiver switches to standby mode.
When in the operating menu, pressing the STANDBY button will cancel your entry (ESC function) and return you to the current standard display.
The STANDBY button is backlit in red both during operation and in standby mode.
To completely switch the receiver off:
Disconnect the receiver from the mains by unplugging the mains unit from the wall socket.
The backlighting of the STANDBY button goes off.
Monitoring the audio signal via headphones
CAUTION! Danger of hearing damage!
Listening at high volume levels for long periods can lead to permanent hearing defects.
Set the headphone volume control to the minimum position before putting the headphones on.
40 | PEAK0 | B.Ch: 20.24 | ew300 G3 | ||||||
| 20 |
|
| 531.675MHz | |||||
| 30 |
| EQ |
|
|
|
| ||
|
|
|
|
|
|
|
| ||
| 10 |
|
|
| SKM300 |
| |||
|
|
| |||||||
|
|
|
| + 12dB |
|
|
| ||
| RF |
| AF | P |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Set the headphone volume control to the minimum position.
40 | Connect headphones with a ¼” (6.3 mm) stereo jack plug to the head- | |
30 | ||
| ||
20 |
| |
10 | ||
RF | ||
|
Gradually increase the volume and monitor the audio signal with the lowest possible volume.
21