AUTOMATIC ON/OFF SWITCHING
The transmitter features a convenient automatic on/off function. When an audio signal reaches the transmitter, it is switched on and the LED at the front of the transmitter lights up green. The LED also indicates that an accupack is being recharged. When a stethoset receiver or an accupack is inserted into a charging compartment, the LED lights up red.
Green LED | = | Transmitter ON |
Yellow LED | = Transmitter ON, Accupack recharging | |
Red LED | = | Accupack recharging |
LED not lit | = | transmitter OFF |
If there is no audio signal for about 3 minutes, the transmitter automatically switches off. The transmitter is now in
IMPORTANT
The transmitter’s charging function (charging compartments and ) is independent of the automatic on/off function. Accupacks can always be recharged when the transmitter is connected to the mains.
When you are not going to use the transmitter for some time (e.g. when you are on holiday), you should unplug the mains unit and take the stethoset receiver and the accupack out of their respective charging compartments.
ADJUSTMENTS ON YOUR TV SET
Please refer to the instruction manual of your TV set to find out whether the volume control also adjusts the headphone output or whether this output has a separate volume control. You will also find instructions on how to switch off the main loudspeakers.
OPTIMUM MODULATION LEVEL OF THE TRANSMITTER
First, set the volume of your TV set to a medium value.
17
