Sennheiser SKP 3000 manual Plugging the plug-on transmitter onto a microphone

full. The transmitter adapts the battery status display according to the type of power supply used (batteries or accupack) and ensures correct transmission of battery status information to the receivers. Individual rechargeable battery cells will not be identified as accupacks.

Plugging the plug-on transmitter onto a microphone

Unscrew the locking ring by turning it fully counter-clockwise (XLR-3 socket is unlocked).

Plug the transmitter’s XLR-3F socket onto the microphone’s XLR-3M socket.

Tighten the locking ring by turning it clockwise (in the direction of the arrow).

Note:

The transmitter uses the microphone body as an antenna – therefore only microphones with a metal casing should be used for best signal transmission.

44