Sennheiser manual Putting the SKP 3000 into operation, Inserting and replacing the batteries

Putting the SKP 3000 into operation

Inserting and replacing the batteries

For powering the plug-on transmitter, you can either use two

1.5V AA size batteries or the rechargeable Sennheiser BA 2015 accupack.

Slide the battery compartment cover in the direction of the embossed arrow until it clicks audibly and open the cover.

Insert the two batteries or the BA 2015 accupack as shown below. Please observe correct polarity when inserting the batteries/accupack.

Close the battery compartment. The battery compartment cover locks into place with an audible click.

Note:

For accupack operation of the transmitter, only use the BA 2015 accupack in order to ensure optimum operational reliability. Batteries and rechargeable battery cells have different discharging curves. The transmitter is able to identify the BA 2015 accupack and to use its capacity to the

43