Troubleshooting
Error checklist
Problem | Possible cause | Possible solution | |
|
|
| |
No operation | Batteries are flat or | Replace the batteries or | |
indication | inserted incorrectly, | check if they are | |
| accupack is flat | inserted correctly or | |
|
| recharge the accupack | |
|
|
| |
Receiver: | Transmitter and | Set transmitter and | |
No RF signal | receiver are not on the | receiver to the same | |
| same channel | channel | |
|
|
| |
| Transmitter is out of | Check the squelch | |
| range | threshold setting or | |
|
| reduce the distance | |
|
| between transmitter | |
|
| and receiving antenna | |
|
|
| |
Receiver: | Transmitter is muted | Deactivate the muting | |
RF signal | (MUTE) | function | |
available, |
|
| |
Receiver’s squelch | Reduce the squelch | ||
no audio | |||
threshold is adjusted | threshold | ||
signal | |||
too high |
| ||
|
| ||
|
|
| |
Audio signal | Transmitter | see “Adjusting the | |
has a high | sensitivity is adjusted | sensitivity – SENSIT” on | |
level of | too low | page 53 | |
background |
|
| |
Receiver’s AF output | Increase the audio | ||
noise | level is adjusted too | output level | |
| |||
| low |
| |
|
|
|
56