Sennheiser SKP 3000 manual Adjusting the sensitivity Sensit

The frequencies are tunable in 5-kHz steps within a switching bandwidth of 36 MHz max.

Note:

When operating a multi-channel system, make sure to only use frequencies that are intermodulation-free.

Adjusting the sensitivity – SENSIT

Via the “SENSIT” menu, you can adjust the transmitter’s input sensitivity.

The sensitivity is correctly adjusted when the level display for audio signal “AF” shows full deflection only during the loudest passages.

For monitoring the adjusted sensitivity, the transmitter’s level display for audio signal “AF” always indicates the audio level – even if the transmitter is muted.

In order to be able to use highly sensitive directional condenser microphones, the plug-on transmitter offers a sensitivity range extended by 20 dB.

The following figures are a guide to the best settings:

	dynamic	directional
	microphones	condenser
		microphones
Loud music/vocals	–30 to –20 dB	–50 to –40 dB
Presentations	–20 to –10 dB	–40 to –30 dB
Interviews	–10 to 0 dB	–30 to –20 dB

53