Putting the transmitter into operation
Putting the transmitter into operation
Preparing the transmitter for use
When using more than one transmitter, we recommend connecting remote antennas and, if necessary, using Sennheiser antenna accessories. Fore more infor- mation, visit the ew G3 product page at www.sennheiser.com.
Mounting the rack mount “ears”
Fitting the device feet
Setting up the transmitter on a flat surface
Place the transmitter on a flat, horizontal surface. Please note that the device feet can leave stains on delicate surfaces.
The rack mount “ears” are designed to help protect the operating elements from damage or deformation, e.g. if the transmitter is dropped. Therefore, fasten the rack mount “ears”, even if you do not want to rack mount your transmitter.
To fasten the rack mount “ears” 
:
Unscrew and remove the two recessed head screws (M4x8) on each side of the trans- mitter (see
Secure the rack mount “ears” 
to the sides of the transmitter using the previously removed recessed head screws (see
Do not fit the device feet when mounting the transmitter into a 19” rack.
Clean the base of the transmitter where you want to fix the device feet.
Fit the device feet to the four corners of the transmitter.
8