Using the transmitter

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item. If the lock mode is activated, you have to temporarily deactivate it In order to be able to operate the transmitter:

￿ Press the jog dial.

“Locked” appears on the display panel.

￿ Turn the jog dial.

“Unlock?” appears on the display panel.

￿ Press the jog dial.

The lock mode is temporarily deactivated:

When you are in the operating menu

The lock mode remains deactivated until you exit the operating menu.

When the standard display is shown

The lock mode is automatically activated after 10 seconds.

The lock mode icon  flashes prior to the lock mode being activated again.

PEAK PEAK

00 -10 -10 -20 -20 -30 -30 -40 -40

B.Ch: 1 1 ew300IEM

516.000MHz

EQ

 

Standard -18dB



Activating/deactivating the RF signal

To deactivate the RF signal:

￿When the standard display is shown on the display panel, press the STANDBY button.

“RF Mute On?” appears on the display panel.

￿ Press the jog dial.

The RF signal is deactivated. “RF Mute” flashes in alternation with the standard display and the display is backlight in red.

To activate the RF signal:

￿Press the STANDBY button.

“RF Mute Off?” appears on the display panel.

￿ Press the jog dial.

The RF signal is activated and the display backlighting changes from red to orange.

You can also deactivate the RF signal on switch-on. For more information, refer to the chapter “Switching the transmitter on/off” on page 13.

18