OR:
Immediately synchronize your receivers with your transmitters by carrying out the Sync function (see right-hand column).
This establishes a transmission link between transmitters and receivers.
The icon in the left lower corner of the transmitter display indicates that the Sync function can be carried out.
–
Store the frequency bank and channel setting by pressing the jog dial on your transmitters. You can carry out the Sync function (see right-hand column) at a later time to establish a transmission link between transmitters and receivers.
–
Place the infra-red interface of the diver- sity receiver in front of the infra-red interfaces of the remaining transmitters, one after the other.
As soon as the transfer is completed, the In addition, the current frequency bank and display panel of the transmitter displays the channel setting is transferred.
numbers of the transferred frequency bank When the transfer is completed, “ ”
and channel.appears on the display panel of the trans- Please note that the transmitter does not mitter. The transmitter then switches back automatically store the frequency bank and to the standard display.
channel setting.The transferred parameters are automati- cally adjusted and stored by the receiver.
The transmission link between transmitter and receiver is now established.
Place the infra-red interface of the receiver (see the instruction manual of the receiver) in front of the infra-red interface of your transmitter.
The parameters adjusted via the “Sync Settings” menu item are transferred from the transmitter to the receiver.
Place the infra-red interface of the receiver (see the instruction manual of the receiver) in front of the infra-red interface of the first transmitter.
The next unused frequency preset is transferred from the receiver to the transmitter.
Easy Setup Sync
Using the transmitter
Sync
16