Using the transmitter

Setting

Transferred parameters

“Balance”

Current balance setting

 

(“−15”/“+15”)

“Squelch”

Current squelch setting

 

(“Off”, “5 dB” ... “25 dB”)

“Mode”

Current audio mode setting

 

(“Stereo”/“Focus”)

“High boost”

Current treble boost setting

 

(“flat”/“High boost”)

“Auto Lock”

Current lock mode setting

 

(“active”/“inactive”)

“Limiter”

Current limiter setting

 

(“−18 dB”, “−12 dB”, “−6 dB”, “Off”)

 

 

When carrying out the Sync function, the transmitter’s current frequency bank and channel setting is automatically transferred to the receiver via the infra-red interface.

Carrying out an Easy Setup Sync or a Sync function

The following assumes that you are using the Easy Setup Sync function for setting up a multi- channel system. You can also you the Easy Setup Sync function for establishing a transmission link between one transmitter and one receiver.

Easy Setup Sync

Sync

 

 

￿Switch your rack-mount transmitters ￿ Switch your rack-mount transmitter

and your diversity receiver on.

and your diversity receiver on.

 

 

 

￿ On all transmitters, call up the “Easy ￿

Press the

button on the trans-

Setup” menu item.

mitter.

 

The text “Easy Setup Sync” and the

The

icon appears on the display

icon appear on the display panels of the

panels of the transmitter.

transmitters.

 

 

The RF signal of the transmitters is auto-

 

 

matically deactivated.

 

 

￿ Use your EK 300 IEM G3 diversity receiver

–

 

to perform a frequency preset scan and

 

 

select a frequency bank with a sufficient

 

 

number of unused channels (see the

 

 

instruction manual of the receiver).

 

 

 

 

 

15