OPERATION

1.2 Tractor Safety Devices

If transporting or operating the tractor and implement near a public roadway, the tractor must be equipped with proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear of the unit. Lights and a SMV emblem must be equipped directly on implements if the visibility of the tractor warning signals are obscured.

Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were removed for access to connect, service, or repair the tractor or implement. Never operate the tractor PTO with the PTO master shield missing or in the raised position. OPS-U- 0004

1.3 Tractor Horsepower

The horsepower required to operate the mower depends on several operating factors including the vegetation to be cut, terrain condition, operator experience, condition of the mower and tractor, and others. For most mowing conditions, the FR240 and FR162 mower requires a tractor with a minimum of 75 HP. Operating the mower with a tractor that does not have adequate power may damage the tractor engine.

1.4 Drawbar

The tractor drawbar must be positioned at a certain length based on the operating speed of the mower for proper driveline operation. If the mower is a 540 RPM unit, position the drawbar length from shaft end to hitch hole at 14”. For 1000 RPM mowers, set the drawbar length at 16” for 21 spline 1-3/8” mowers and at 20” for 1-3/4” 20 spline mowers.

Ensure that the drawbar is rated to carry the tongue weight of the mower.

Pintle Hook Hitch-Optional Equipment

Drawbar length must be modified to obtain dimension “A” (CV Driveline = 17” ± 2”)

FR240-FR162 01/11

Operation Section 4-5

© 2011 Alamo Group Inc.

OPERATION

Page 111
Image 111
Servis-Rhino FR162, FR240 manual Tractor Safety Devices, Tractor Horsepower, Drawbar, Pintle Hook Hitch-Optional Equipment