Prepare For Safe Operation
Check The Mower And Tractor Equipment
Before beginning your work day inspect the machine and have all systems in good operational condition.
WARNING! Prevent possible crushing injury from falling equipment. Hydraulic system or part failure could cause unsupported equipment to fall. Do not go under raised equipment unless it is properly supported according to the operator’s manual.
—Perform daily and periodic service procedures as instructed by the equipment manufacturer.
—Check for loose, broken, missing or damaged tractor and mower parts. Repair or replace these parts.
—Check for proper tractor and mower attachments.
—Check for proper tractor and mower PTO rpm rating match.
—Check mower blade(s) condition. Replace severely worn, bent, gouged or nicked blades including the blade bolts and fasteners. Never straighten or weld on blades.
—Ensure thrown object shielding is properly installed and in good condition. Repair or replace if damaged or missing.
Inspection
Maintain
Machine
Read Manual –
Block Up or
Securely Support
Mower
Prepare For Safe Operation
—Check that all guards and shields are in place and that all equipment is in good operating condition. This includes PTO driveline, gearbox and implement guards and shields that are used for operator protection.
—Check for properly latched driveline
—Check for damaged or leaky tractor and mower hydraulic systems. Repair or adjust as needed.
WARNING! Hydraulic fluid under pressure can penetrate the skin or eyes and cause serious injury, blindness or death. Fluid leaks under pressure may not be visible.
Use a piece of cardboard or wood to find leaks, not your hand. Wear eye protection. If fluid is injected into the skin, it must be removed within a few hours by medical personnel familiar with this type of injury.
—Keep the operator platform surface clean and free of grease, oil, dirt, snow or ice. Steps and handholds must be clean and functional.
—Ensure work lights are kept clean (if equipped). Check that all lights work properly.
—Ensure the slow moving vehicle (SMV) sign, reflectors and warning lights are in good condition and can be clearly seen.
—Ensure all tools or loose objects are removed or securely fastened while operating the machine.
—Check all safety signs for clarity. Replace damaged signs.
Check for Missing/ Damaged Guards and Shields
Check for
Leaks and Inspect
Hoses
Put Away
Tools
9
