Servis-Rhino P/N 00763618C manual Safety Chains Pull Type

Models: P/N 00763618C

1 114
Download 114 pages 7.2 Kb
Page 91
Image 91

OPERATION

NOTE: If attaching Mower Clevis, tractor drawbar must extend to rear to allow turning without binding in the Tongue Clevis. DO NOT USE THIS TYPE DRAWBAR WITHOUT STABILIZERS. Install washers the same as detailed previously. See art below.

DRAWBAR EXTENSION

TRACTOR

LOWER

LINKS

CONTACT HERE

DRAWBAR

WILL CAUSE

 

IMMEDIATE

 

TONGUE OR CLEVIS

 

FAILURE

 

ALLOWS AMPLE

TURNING CLEARANCE

STABILIZERS

FIGURE 2

NOTE: NEVER ATTACH MOWER TO TRACTOR WITH A PIN NOT HAVING A NUT.

The two halves of the Clevis must be bolted together securely to carry the load properly without springing or breaking the Clevis.

DANGER! Failure to adjust the Drawbar to the CORRECT LENGTH, failure to PROVIDE DRAWBAR CLEARANCE sufficient for short turns, and/or failure to ATTACH CLEVIS TO THE DRAWBAR correctly and securely MAY ALLOW THE MOWER TO SEPARATE FROM THE TRACTOR AND/OR THE DRIVELINE HALVES TO SEPARATE WHICH CAN CAUSE SERIOUS BODILY INJURY OR DEATH TO THE OPERATOR OR OTHERS.

SAFETY CHAINS - PULL TYPE

When towing implements on the highway, use safety chain supplied with Implement. This will control the implement in the event the hitch pin is lost.

After attaching the safety chain, make a trial run by driving the tractor to the right and to the left for a short distance to check safety chain adjustment. If necessary, readjust to eliminate tight or loose chain.

Turf Flex 08-01

Operation Section 4-3

R 12-13-95

© 2004 Alamo Group Inc.

 

 

OPERATION

Page 91
Image 91
Servis-Rhino P/N 00763618C manual Safety Chains Pull Type