MAINTENANCE
MAINTENANCE
SWIVEL ASSEMBLY
The Swivel Assembly should be lubricated every 8 hours. Figure 3.
FIGURE 3
GAUGE WHEEL ASSEMBLIES
Gauge wheels are equipped with bushings which require grease daily. Grease Fittings are provided in the Wheel Hub and Gauge Wheel Pivot . Grease after 8 hours of use. Figure 4 &5.
FIGURE 4 | FIGURE 5 |
BLADE SPINDLE LUBRICATION
Blade spindles must be lubricated daily (every 8 hrs). Figure 6. Access lubrication fitting through hole in outer shields and in center gearbox mounting. Each spindle must be lubricated enough each time to force small amount of grease out through top seal. NOTE: Do not over lube as excess grease may get on belt drive.
FIGURE 6
Turf Flex | Maintenance Section | R |
|
© 2004 Alamo Group Inc.
