Servis-Rhino RC-12 manual Asm-FL-0066

ASSEMBLY

ASSEMBLY

•Place key (item 1) in end of jackshaft and slide round end of PTO shaft over jackshaft. Attach with two 3/8" set screws (item 2). Align set screws with dimples in jack shaft. Apply thread locking compound to threads

to prevent loosening. Ensure driveline and jackshaft U-joint are in phase. Asm-FL-0066.

•Place jack shaft shield (item 1) in place over shield mount (item 2) and bearing stand. Fasten in place with two 3/8" bolts, lockwashers and washers at shield mount and on either side of bearing mount. Asm-FL- 0067.

RC12 12-05 Assembly Section 3-4

© 2005 Alamo Group Inc.