Servis-Rhino RC-12 manual Operation, Cat Ii-Iii Q.H

OPERATION

1. Standard Equipment and Specifications

RC 12

Cutting Width	144”
Overall Width	156”
Cutting Height Range	1-18”
Cuttershaft Diameter	10-3/4”
Lift Type Hitch	CAT II-III Q.H.
Semi Mount Hitch	CAT II-III Q.H.
Pull Type Hitch	Clevis
Min. HP Required (Lift type*)	90 HP
Min. HP Required (Semi-Mount)	90 HP
Min. HP Required (Pull type)	90 HP
Gearbox Rating**	207 HP
Blade Tip Speed	12,620 FPM
Rotor Speed	2000 RPM
Number of Knives	128
Driveline Size	CAT 5 or 6
Hood Thickness	3/16”
End Plate Thickness	1/4 “
Drive Belt	5 x 5V, Banded
Front Safety Deflectors	Std.
Weight (Approx.)	4025 lbs.
*with adequate front weights
**1000 RPM

The Mower is designed for certain mowing applications and is rated to cut up to a specific size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-

vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component damage and equipment failure resulting in possible serious injury or death. (SGM-14)

RC12 12/05 Operation Section 4-3

© 2005 Alamo Group Inc.

OPERATION