Shark SSG-503027E, SSG-503027G, SSG-503537E, SSG-503537G, SSG-603537E, SSG-603537G manual Washer

WASHER

COMPONENT IDENTIFICATION SMALL

OPERATOR’S MANUAL PRESSURE

Quick

Coupler

Discharge

Nipple

Burner Fuel

Tank

Spray Gun

High

Pressure

Hose

Flue Adapter

Optional 7-10049

Insulation Gasket

Optional 7-01471

Water

Supply Hose (not included)

Pressure

Nozzles

Detergent	Adjustable
Valve
	Thermostat
	Burner
	Switch

Hour Meter

Pump

Unloader Valve

Trigger

Nozzle Quick

Wand

Coupler

Starter Grip

6

Pump — Delivers a specific gpm to the high pressure nozzle which develops pressure.

Starter Grip— Used for starting the engine manually.

Spray Gun — Controls the application of water and detergent onto cleaning surface with trigger device. In- cludes safety latch.

Unloader Valve— Safety device which allows pres- sure to be released when spray gun is closed.

Wand — Must be connected to the spray gun.

High Pressure Hose — Connect one end to water pump discharge nipple and the other end to spray gun.

Adjustable Thermostat — Safety control which pre- vents temperatures from going above adjustable set- ting.

Note: If trigger on spray gun is released for more than 2 minutes, water will leak from valve. Warm water will discharge from pump protector onto floor. This sys- tem prevents internal pump damage.

Note: if flue adapter is installed, the burner assembly air adjustment must be adjusted.

SHARK SSG • 97-6134 • REV. 7/05a