Shark SSG-503027E, SSG-503027G, SSG-503537E, SSG-503537G, SSG-603537E, SSG-603537G manual Lever

OPERATING INSTRUCTIONS

Oil Dipstick

STEP 1: Check engine oil level. Oil level should be level with the bottom of the oil filler neck. Be sure the machine is level when checking the oil level. (Refer to the engine's operating manual included with machine.) We recom- mend that the oil be changed after the first 5 hours of use, then once every 50 hours. Note: Improper oil levels will cause low oil sensor to shut off engine. IMPORTANT! Do not run engine with high or low oil levels as this will cause engine damage.

Gas

Tank

STEP 2: Fill gas tank with unleaded gasoline. Do not use leaded gaso- line.

OPERATOR’S MANUAL PRESSURE WASHER

Cold

Water

Source

Garden

Hose

STEP 3: Connect garden hose to the cold water source and turn wa- ter on completely. Never use hot water.

STEP 4: Trigger the spray gun to eliminate trapped air then wait for a steady flow of water to emerge from the spray nozzle.

Fuel Valve

Lever

STEP 5: Rotate the fuel shut-off valve to the "On" position. Slide the fuel valve lever to the "ON" position. When the engine is not in use, leave the fuel valve in the "OFF" position.

8

Choke

Lever

STEP 6: Pull the choke lever out to the "Choke" posi- tion (on a warm engine, leave the choke lever in the run position). Push the choke lever to the "Closed" posi- tion. To restart a warm engine, leave the choke lever in the "Open" position.

Engine

On-Off

Switch

STEP 7: Turn the engine switch to "Start" position.

SHARK SSG • 97-6134 • REV. 7/05a