Sharp O2 manual Changing the File Name, Adjusting the Size of the Image, Sending Messages

Changing the File Name

1.Perform steps 1 to 3 in “Viewing Images” on page 37.

2.Select the file name you wish to change by pressing

or , then press [Options]. The Options Menu is displayed.

3.Select “Rename”, then press .

4.Enter a new file name.

To correct the last character, press [Clear] briefly.

Press and hold [Clear] to clear all characters.

5.Press .

Note

•Following characters cannot be used for a file name: /, \, :, *, ?, ", <, > and . (period).

Adjusting the Size of the Image

The images that are registered in the Image Gallery can be adjusted for use as a wallpaper during stand-by or as an incoming call display.

When the image size is modified, the data size is updated.

1.Perform steps 1 to 3 in “Viewing Images” on page 37.

2.Select the file name you wish to adjust by pressing

or , then press [Options]. The Options Menu is displayed.

3.Press or to select “Adjust Size”, then press .

4.Select the image size you wish to change by pressing or , then press .

5.To determine what part of the image is chosen to be

displayed, select it by pressing , , or , then press .

6.Press .

To cancel registration, press [Back] at any time before step 6.

Note

•“Adjust Size” may not be available depending on the image original and copyright issued.

Sending Messages

1.Perform steps 1 to 3 in “Viewing Images” on page 37.

2.Select the file name you wish to send by pressing

or , then press [Options]. The Options Menu is displayed.

My Phone 38