To Set Built-in Images

1.Perform steps 1 to 3 in “Changing the Language” on page 76.

2.Press or to select “Assign Images”, then press .

3.Select the screen to set the image by pressing or

, then press .

4.Select “Animation 1” or “Animation 2” by pressing

or , then press . or

Select “Illustration 1” or “Illustration 2” by pressing

or , then press when you select “Alarm” in step 3.

The selected image is displayed.

5.Press .

Tip

• To cancel the image setting, select “Off” in step 4.

To Set an Original Image

1.Perform steps 1 to 3 in “To Set Built-in Images”.

2.Press or to select “Original”, then press . The file name of the image that is registered in the Image Gallery is displayed.

3.Select the image by pressing or , then press

.

The selected image is displayed.

4.To determine what part of the picture is chosen to be

displayed, select it by pressing , , or , then press .

Note

Some images cannot be used because of their image and data types.

Phone Setting Reset (M 7-1-8)

The phone settings can be reset to their default settings.

1.Perform steps 1 to 3 in “Changing the Language” on page 76.

2.Press or to select “Set to Default”, then press .

3.Enter your handset code, then press .

4.Press or to select “Yes”, then press . To cancel resetting, select “No” in step 4, then press .

All phone settings are reset.

Note

If you enter a wrong handset code in step 3, operation is cancelled.

79 Settings

Page 80
Image 80
Sharp O2 manual To Set Built-in Images, To Set an Original Image, Phone Setting Reset M