7.Press 
or 
to select a tempo, then press 
.
The music tempo is described below.
• | “Allegro (Fast)”: | 150 |
• | “Moderato (Normal)”: | 125 |
• | “Andante (Slow)”: | 107 |
• | “Adagio (Very Slow)”: | 94 |
Tempo is defined by the number of crotchets ( ) played per minute.
8.Select “8 Chords” or “16 Chords” by pressing 
or 
, then press 
.
9.Specify the musical scale and rest using the digit keys.
For details on specifying the sound level and rest, see “Specify the Musical Scale and Rest” on page 47.
10.Specify the types of musical notes or rest using
or 
keys.
For details on specifying the musical notes and rest, “Specifying the Types of Notes and Rests” on page 47.
11.Press 
key after inputting one note.
Input the next note after the cursor moves to the right.
12.Repeat steps 9 to 11 to input notes.
When you press 
during input, the melody that you have entered is played back.
When you press 
[Options] and select “Play before Cursor” whilst entering notes, the melody, that is displayed on the screen, is played back up to the cursor position.
When you press 
[Options] and select “Select Chord”, you can select another chord. Repeat steps 9 to 11 to input notes for the new chord.
13.When you finish inputting, press 
[Options] to display the Options Menu.
14.Select “Save”, then press 
.
15.Press 
or 
to select “Save to Gallery”, then press 
.
Your original ringing tone is registered in the Sound Gallery.
Note
•If the capacity or the memory in the Sound Gallery becomes insufficient, the message of “Maximum Capacity : 80 Not registered” or “Not registered. Memory Full” is displayed respectively. At that time, the display returns to the screen of step 15. Try again after deleting unnecessary data (p. 41).
Fun & Games | 46 |
