Sharp O2 manual Set the Effect Frequency, Creating Your Original Tone

Parameter			Meaning
Decay Rate	This sets the time from the maximum volume
(16 levels)	to the volume of the sustain level.
Sustain	In sustaining note, this displays the volume
	of the sound that continues to produce. In
Level
	fading-out note, this displays the volume
(16 levels)
	when the note starts fading-out.
Release	In sustaining note, this displays the sustain-
	ing time from note completion to no sound.
Rate
	In fading-out note, this displays the time from
(16 levels)
	starting fade-out to no sound.
	Select the basic wave type from eight types.
Wave	Type 1	Type 2	Type 3	Type 4
Shape
(8 types)	Type 5	Type 6	Type 7	Type 8
Vibrato	Set the vibrato. If the vibrato is used, select
(4 levels/
	from 4 levels.
Off)
Tremolo	Set the tremolo. If the tremolo is used, select
(4 levels/
	from 4 levels.
Off)
Feedback	Set the level of modulation in the modulator
(8 levels)	feedback for Operator 1.

Set the Effect Frequency

Define the frequency of the vibrato or tremolo.

The frequency becomes faster as the figure increases.

Creating Your Original Tone

1.Press to display the Main Menu.

2.Press or to select “Fun & Games”, then press .

3.Press or to select “Tone Editor”, then press .

4.Select “For 8 Chords” or “For 16 Chords” by pressing or , then press .

5.Select the number you wish to register and press .

6.Press or to select “Rename”, then press .

7.Enter the title.

Up to 16 characters can be entered.

For details on entering characters, see “Entering Characters” on page 23.

8.Press .

9.Press or to select “Base Tone Set”, then press .

10.Select a category of the tone by pressing or .

Fun & Games 54