Colour Reduction (M 7-1-5)
The colour of the screen of this phone is automatically reduced for preventing battery draining if it is not operated.
You can change the time the Colour Reduction will go into effect works between 2 and 20 minutes, or disable this function.
Tip
•When you purchase this phone, the colour reduction is set to work 2 minutes later.
1.Perform steps 1 to 3 in “Changing the language” on page 76.
2.Press 
or 
to select “Colour Reduction”, then press 
.
3.Select “On” to set the colour reduction function on
or “Off” to set it off by pressing 
or 
, then press 
.
When you select “On” in step 3:
4.Enter the time until the colour reduction works in two digits (02 to 20 minutes) using the digit keys, then press 
.
Note
•The colour reduction does not work whilst you are calling or using WAP service.
Setting the Greeting Message (M 7-1-6)
You can set the message which will appear when the phone is turned on.
1.Perform steps 1 to 3 in “Changing the Language” on page 76.
2.Press 
or 
to select “Greeting Message”, then press 
.
3.Press 
or 
to select “On”, then press 
.
4.Enter the message, then press 
.
Up to 16 characters can be stored as a message. For details on entering characters, see “Entering Characters” on page 23.
Tip
•To cancel the Greeting Message setting, select “Off” in step 3.
Assign Images (M 7-1-7)
Images can be displayed when turning the power on or off, when receiving an incoming call, or when operating the alarm.
Images taken by a digital camera or downloaded from a WAP site can be used.
Settings 78
