Checking the Sound Data

Select the desired sound as in step 4 in “Playing Back Sounds” on page 39, then select “File Information”

after pressing [Options].

The file type and size of the selected sound are displayed. Whether the sound can be copied, forwarded or saved is also displayed.

To return to the Sound Gallery, press [Back].

Changing the File Name

1.Perform steps 1 to 3 in “Playing Back Sounds” on page 39.

2.Select the file name you wish to change by pressing

or , then press [Options]. The Options Menu is displayed.

3.Select “Rename”, then press .

4.Enter a new file name.

To delete the last character, press

[Clear]

briefly.

 

 

Press and hold

[Clear] to clear all characters.

5.Press .

Note

Following characters cannot be used for a file name: /, \, :, *, ?, ", <, > and . (period).

Tip

When “Data Edit” is displayed in the menu in step 2, you are able to edit the sound (p. 50). Once you have completed editing the newly saved file overwrites the old file. This new file then becomes the original ring tone.

Setting the Tone and Strength

1.Perform steps 1 to 3 in “Playing Back Sounds” on page 39.

2.Select the file name you wish to edit by pressing

or , then press [Options]. The Options Menu is displayed.

3.Press or to select “Tone Set” or “Strength Set”, then press .

For full details, see pages 48 to 50.

Note

If “Tone Set” and “Strength Set” are not displayed in the menu in step 2, you cannot change the settings.

My Phone

40

Page 41
Image 41
Sharp O2 manual Checking the Sound Data, Setting the Tone and Strength