Sharp O2 manual Deleting an Original Ringing Tone, Editing Original Ringing Tones

Category	Tone		Category	Tone
	Tinkle Bell			Gtr. Fret Noise
	Agogo			Breath Noise
	Steel Drums			Seashore
Percus-	Woodblock	Effects		Bird Tweet
sions	Taiko Drums			Telephone Ring
	Melodic Tom			Helicopter
	Synth Drum			Applause
	Reverse Cymbal			Gunshot
	Original 1 (Piano)*
	Original 2 (Glockenspiel)*
Original	Original 3 (Reed Organ)*
	Original 4 (Nylon Guitar)*
	Original 5 (Violin)*

*The default setting tone.

To create your original tone, see “Creating Your Original Tone” on page 54.

Setting the Strength of the Original Ringing Tone The strength of the original ringing tone can be set in 3 levels for each melody.

When you purchase this phone, the strength of the original ringing tone is set to “forte (Loud)”.

1.Perform steps 1 to 13 in “Creating Your Original Ringing Tone” on page 45.

2.Press or to select “Strength Set”, then press .

3.Select a strength of the tone by pressing or ,

then press .

When “Play Current Chord” is selected, the original ringing tone entered is played back in the selected strength of the tone.

4.Select “OK”, then press .

Now you can create an original ringing tone.

Deleting an Original Ringing Tone

Perform steps 1 to 4 in“Deleting Sounds” on page 41.

Editing Original Ringing Tones

1.Perform steps 1 to 3 in “Creating Your Original Ringing Tone” on page 45.

2.Press or to select “Existing Melodies”, then press .

Fun & Games 50