
Set the Any Key Answer function in the profile in each mode. (p. 61)
Tip
•If you have subscribed to the Calling Line Identification (CLI) service and the caller’s network sends the number, the caller’s number will appear on the screen. If the caller’s name and number are stored in the Phonebook, the caller’s name will appear on the screen.
•If the number is a restricted number, the display shows “Withheld”.
•When receiving a call from the person whose picture is registered in the Phonebook, receiving display and the picture are displayed alternately.
Rejecting an Incoming Call
You can reject a call you do not wish to answer.
1.Press or
[Reject] whilst the phone is ringing.
The caller hears a busy tone or is diverted to voicemail if this is activated.
Incall Menus
Your phone has additional functions available whilst a call is in progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume during a call.
1.During a call, press .
2.Press to increase the earpiece volume or press
to decrease the earpiece volume.
Each press of or
adjusts the earpiece volume by one of 5 levels.
3.Press [OK].
Putting a Call on Hold
This function allows you to manage two calls at the same time. If you wish to make another call whilst you are talking to someone, you can put the current call on hold to call someone else.
To make another call during a call
1.During a call, press [Options] to display the Options Menu.
2.Select “Hold”, then press .
The current call is put on hold.
To retrieve a call, press [Options] and select “Retrieve”, then press
.
Call Functions | 20 |