Sharp O2 manual To select the picture size, To select the mode, Retaking Pictures

Note

•When “Select Size” is set to “Large”, you cannot use the zoom function.

To select the picture size

1.Press [Options] before step 2 in “Taking Pictures” to display the Options Menu.

2.Press or to select “Select Size”, then press .

3.Select the picture size by pressing or , then press .

To select the mode

1.Press [Options] before step 2 in “Taking Pictures” on page 33 to display the Options Menu.

2.Press or to select “Select Mode”, then press .

3.Select the mode by pressing or , then press .

Note

•Vertical stripes may be reflected to a picture by light source. Change the mode in this case.

Retaking Pictures

After steps 1 and 2 in “Taking Pictures” on page 33,

press [Back].

Further shooting is available.

Note

•The Digital Camera Uses a C-MOS Sensor. Although this camera has been manufactured to the highest specification, some pictures may still appear too bright or too dark.

•If the phone has been left in a warm place for a long time before taking or registering a picture, the picture quality may be poor.

In the Case of No Available Memory

When the number of pictures that can be taken becomes 5 or less, or when the remaining capacity becomes 27.5 Kbytes (when “Medium” is selected as the picture size) or less, “ ” will appear on screen. The screen returns to step 2 in “Taking Pictures” on page 33. The number of pictures that can be taken is displayed in the upper left of the screen. (The number of pictures that can be taken is approximate.)

When the number of pictures that can be taken becomes 0, and when you try to take a picture again, “Can not take a picture. Maximum Capacity” is displayed.

Camera 34