Sharp O2 manual Three continuous notes are required for triplet, Set the Tone

Note

•You cannot make a dotted semiquaver (semiquaver rest) or a dotted semibreve (semibreve rest).

•Three continuous notes are required for triplet.

To specify a tie, press after selecting the target notes.

An underscore (_) is displayed next to the note, and the note is tied with the next one.

To enter the next note, press and move the cursor to the right. Then, repeat the operation on the previous page.

If the cursor is positioned next to a note, you can repeat the note immediately left of the cursor when or

is pressed.

Set the Tone

The phone can play notes using different instruments.

1.Perform steps 1 to 13 in “Creating Your Original Ringing Tone” on page 45.

2.Press or to select “Tone Set”, then press .

3.Select a category of the tone by pressing or .

4.Select a tone by pressing or , then press . When “Play Current Chord” is selected, the melody entered is played back in the selected tone.

When “Confirm Tones” is selected, the syllable names are played back in the selected tone.

5.Select “OK”, then press .

Now you can create a melody.

You can select from the following 128 tones

Category	Tone	Category	Tone
	Piano		Celesta
	Bright Piano		Glockenspiel
	E. Grand Piano		Music Box
Pianos	Honky-Tonk	Chimes	Vibraphone
	Electric Piano 1		Marimba
	Electric Piano 2		Xylophone
	Harpsichord		Tubular Bells
	Clavi		Dulcimer

Fun & Games 48